 |
 MemoCamTM
is a complete stand-alone digital CCTV system in a single device. It is a high performance B/W camera with automatic digital recording contained in a single compact enclosure.
The MemoCamTM system includes a CCD camera, a video compression engine, a removable Memory Card and a PIR detector. It automatically records events on the memory card following an alarm. The recording can be activated by an external open contact, an internal PIR detector,
video motion detection or by an external remote control unit.
To analyze the recorded events, the memory card can be removed from the MemoCamTM unit and images downloaded to a PC using a Memory Card Reader.
Main Features
- Stand-alone integrated CCTV system packaged in a standard PIR detector case.
- B/W camera.
- Automatic recording upon alarm.
- Standard 16 Mb Multi media card can contain up to
3000 recorded images on a single card.128
Mb card can contain up to 24000 images.
- Automatic setup using the Memory Card.
- User defined image quality, frame rate, and recording time per event, delay between frames, and more.
- Remote Control unit.
- Covert case.
Benefits
- The stand-alone MemoCam replaces the classic Time Lapse DVR + PIR detector + Camera equipment set.
- Modular solution from single camera to multiple site/multiple camera systems.
- Easy to use PC software.
- Economical system expansion.
Applications
- Image and event recording anywhere, especially where wire connections are impossible or difficult.
- Unattended automatic recording at any site.
- Mobile applications.
Operation
One or more stand-alone unit can be placed at a different site location and set-up using the memory card.
When the MemoCamTM is armed, using the remote control unit the camera starts recording when the alarm is triggered. The recording process can also be activated by pressing the REC button on the remote control unit, whether the unit is armed or not. All images are stored to the memory card.
 Device Setup
All camera functions are configured on the Memory Card. The configuration parameters are setup using the MemoCam™ software on a PC connected to a Memory Card reader. Configuration parameters include:
- Recording.
- Triggering.
- Arming.
- Maintenance (e.g. Clear the memory, Status of available memory, etc.)
- Image retrieval.
- Time and Date.
Remote Control Unit
Each camera is equipped with a remote control unit with the following functions:
- Arm.
- Disarm (Code-protected).
- Record frame.
- Preset functions.
Arming/Disarming
Each camera can be armed or disarmed using the remote control.
Event Recording
A new event file is recorded upon alarm activation. Each event is recorded according to the MemoCam™ configuration as follows:
- Fixed memory mode - Recording stops when the memory card is full.
- Cyclic mode - When the memory card is full, new events are recorded over previous events in the memory card queue.
Image Retrieval
Compressed images can be retrieved from the removable memory card using a memory card reader connected to a PC via a USB Card Reader.
|
Dimensions |
External dimensions
(W x H x D)
(excluding base)
|
67 x 135 x 65 mm |
| Weight (excluding base) |
250 g |
| |
|
Camera |
| TV standard |
B&W CCIR |
| Resolution |
420 TV lines |
| Sensitivity |
0.1 Lux (F2.0) |
| S/N Ratio |
Better than 48db |
| Shutter control |
Automatic 1/50 - 1/100,000 |
| Pinhole lens |
F3.7 mm standard (optional different lenses available) |
| |
|
Recording |
| Storage medium |
Removable MMC Memory Card
16Mb as standard. 16M, 32M, 64MB and
128M are available. |
| Multi
Media card reader |
Any
USB Multi Media card reader available. |
| Picture format |
JPEG with automatic Thumbnails Support. |
| Picture quality options |
Medium, Good, High and Super modes, from 5K up to 20K image sizes. |
| Recording rates |
From 3 images per second to 1 image per 5 minutes. |
| Recording options |
Fixed - records fixed number of events until memory is full. |
| |
Cyclic - Continue recording from start when memory card is full. |
| Delay time between alarm triggers |
1 sec to 5 minutes |
| Number of images per event |
1 to 100 images |
|
|
|
Detector, Dual Element PIR |
| Lens Type |
Hard Spherical Lens |
| Sensitivity |
 1.6 oC ( 3oF)@0.6 m/sec (2 ft/sec) |
| Detection Speed |
0.3-1.5 m/sec (1-5 ft/sec) |
| Temp. compens. |
Bi-directional |
| Pulse count |
1,2 Dip switch; 2-3 Automatic depending on speed spectrum analysis. |
| Coverage |
Wide angle 90o 18m x 18m
(60ft x 60ft)
|
| RFI Protection |
30V/m 10-1000MHz |
| EMI Protection |
50,000V of electric interference from lightning or power through. |
| |
|
Terminal Connectors and Switches |
| External input |
Isolated dry contact input |
| Relay output |
28VDC, 0.1A with 10ohm serial resistor, opens for 1.6 sec upon detection. |
| Tamper switch |
If cover is removed. |
| Separated power feeds |
Optional Separated power feeds for PIR and Recording module sections. |
| |
|
Power Supply |
| Total power consumption |
Typical -500mA @ 12 VDC |
| PIR detector only |
Typical -30mA @ 12 VDC |
| |
|
Reader Software and PC Requirements |
| Minimum system requirements are as follows: |
| CPU |
Pentium II 200Mhz or higher. |
| RAM |
16 Mega bytes or higher. |
| Graphic adapter |
Super VGA or higher |
| Display resolution |
640x480, 16 bit or higher. . |
| Operating systems |
Windows 98,
Win 2000 and WIN XP with USB support.
Internet Explorer 5.0 or higher |
|
|
For more information about MemoCam
